Home > Inks, Patina's, Paints & Pastes > Gliders Paste
Sort By:
1
Violet guilders paste African bronze guilders paste Antique gold Guilders paste
Baroque Art Gilders Paste 1oz, Violet

Violet is a soft, pale purple shade

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
Baroque Art Gilders Paste 1oz, African Bronze

African Bronze is a greenish-bronze shade with hints of gold metallic flake

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
Baroque Art Gilders Paste 1oz, Antique Gold

Antique Gold has a deep, rich red gold metallic tones

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
Damson guilders paste Celtic bronze guilders paste coral red guilders paste
Baroque Art Gilders Paste 1oz, Damson
Damson is a deep purple shade

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
Baroque Art Gilders Paste 1oz, Celtic Bronze

Celtic Bronze is a light greenish bronze metallic shade

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
Baroque Art Gilders Paste 1oz, Coral Red

Coral Red is a deep charcoal red, with silver/copper metallic tones

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
copper guilders paste Foundry bronze guilders paste Inca gold guilders paste
Baroque Art Gilders Paste 1oz, Copper

Copper is a dark patina copper metallic tone

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
Baroque Art Gilders Paste 1oz, Foundry Bronze

Foundry Bronze is a brownish bronze metallic tone

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
Baroque Art Gilders Paste 1oz, Inca Gold

Inca Gold is a slight brassy metallic gold shade

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
Pinotage guilders paste Gold guilders paste Patina guilders paste
Baroque Art Gilders Paste 1oz, Pinotage

African Bronze is a greenish-bronze shade with hints of gold metallic flake

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
Baroque Art Gilders Paste 1oz, Gold

Gold is the traditional 22K gold metallic shade

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
Baroque Art Gilders Paste 1oz, Patina

Patina is an aged copper shade

Let the glowing metallic or vivid, jewel-like tones of these innovative, decorative, non-tarnishing pastes transform picture frames, furniture, metalwork, artwork, molding, ceramics, textiles, decoupage, cement, polymer clay, gourds or almost any clean, dry surface. Baroque Art Gilders Paste is made of highly concentrated metallic and organic pigments blended with a wax base. It can be used both indoors and outdoors with little or no surface preparation. Apply with brush, sponge, cloth or almost anything. There is no dripping, so masking is not required. Treated surfaces dry to the touch in 30 to 60 minutes. Allow 12 hours before installing or polishing. Once dry, surfaces are durable and water repellent. Clean up with paint thinner or mineral spirits.

To use on aluminum, copper, brass, silver, glass or other smooth surfaces, the surface would need to be distressed with steel wool, sand blasting, 400 grit sand paper or etching solution/etching primer. This will provide the "tooth" needed for the Gilders paste to adhere to.

Please note: If the paste is dry, simply add a few drops of paint thinner, mineral spirits, or turpentine. What I usually do is spoon out a little of the paste into a small glass bowl, add a drop or two of mineral spirits and mix to the consistency I want. No need to mix the whole tin! Be sure NOT to use any oil based cleaners/solvents to mix your Gilders paste.....your paste will remain wet and tacky and take days or even weeks to dry.
   
 
1